Copper Lantern Co. FAQ
1. What types of copper finishes are available?
The Copper Lantern Company’s gas and electric lanterns are available in a variety of finish options. Our standard finish is raw copper. This finish will begin to patina immediately after installation. The bronze and black finishes are powder coated and baked onto the lanterns. For customers that order the electric versions of our lanterns, you may choose from the previously mentioned finishes plus an option of clear lacquer to protect the raw copper finish.
2. How do I know that my The Copper Lantern Company fixture will be approved in my area?
All The Copper Lantern Company gas lantern fixtures use U.L. approved electrical components and gas components. All Copper Lighting Company gas lanterns are U.L. certified for outdoor use. This certification satisfies almost all local codes. For more information about codes, contact a local installation professional.
3. How do I clean/care for my The Copper Lantern Company fixture?
Virtually no maintenance is necessary, as our fixtures are handcrafted to last a lifetime. On occasion, the glass may be cleaned after the panes are carefully removed.
4. Why won’t my gas fixture stay lit?
A. Make certain that the glass panes are flush against the frame.
B. In high wind conditions, place copper pennies over 2 of the holes in the base of the fixture to reduce wind.
C. Lastly, the gas line may need to be checked by a plumber.
5. What type of solder are The Copper Lantern Company made with?
The Copper Lantern Company gas and electric lanterns are soldiered with high temperature lead free soldier.
6. How many inches must a fixture hang from a ceiling on a porch?
The National Fuel Gas Code ANSI Z2231.1 (NFPA54) requires that there must be at least 12” clearance above a hanging gas light. However, as always, local code prevails.
7. What is the required code from the flame to the combustible wall?
The National Fuel Gas Code ANSI Z2231.1 (NFPA54) requires that there must be at least 6” clearance from the flame to the wall. However, as always, local code prevails.
8. How high should my flame be?
For optimum beauty and economy, The Copper Lantern Company gas lantern lights are designed for a flame to not exceed two inches in height.
9. How many BTUs does each fixture use?
Each single burner open flame gas lantern from The Copper Lantern Company uses 1460 BTUs.
10. May I use propane for my gas fixture?
Yes, The Copper Lantern Company gas lanterns offer a burner assembly specifically designed to accommodate propane.
11. What is the standard size for the post mount attachment?
The standard post size is 3”. The Copper Lantern Company gas and electric lanterns can customize and attachment to accommodate any size post.
12. What is the size of the standard back plate?
The standard back plate is designed to cover a standard 4” octagon box. However, the size of the back plate varies according to the size and shape of the fixture. The Copper Lantern Company gas and electric lanterns can make custom back plates to accommodate the customer and the application